More about growing seedlings: The golden rules

Germination and growing requirements for flowers, vegetables and herbs from seed can vary depending on the type of plant grown. With moisture, light, fertilizer and other considerations, there are many factors that influence germination and subsequent quality of seedling growth. However, there are also some common environmental growing conditions that can be applied to all seedling crops to produce quality seedlings/plugs.

Growing Medium

There are many types of seed germination media available for seedling production. These products are composed of fine peat, perlite or vermiculite. Germination media formulated with fine perlite dry out a little faster than the ones formulated with fine vermiculite. Fine perlite germination media are ideal for winter and high humidity production, whereas those with fine vermiculite are ideal for late spring through early fall or in conditions where the growing medium dries out rapidly.

Specific medium menu

Also consider the plant’s growth rate and susceptibility to root diseases. Tomatoes, lettuce, impatiens, marigolds, zinnia, basil, etc. may perform better in a fine peat-fine vermiculite germination medium while spinach, thyme, begonia, pansy, vinca prefer a faster drying fine perlite-fine peat germination medium.

The Right Plug Trays

Select plug trays or open flat trays depending on your seedling and transplant needs. Shallow plug trays hold more water throughout the profile of the cell. Deeper trays hold less water throughout the profile of the plug, therefore provide greater air space for developing roots. It is important to fill trays uniformly, taking care not to compress growing media into cells since this can result in uneven air space and water holding between cells causing uneven seed germination.

Controlled Environment

Most seeds germinate well at a media temperature of 22-25 °C, although some crops do better at a cooler or warmer temperature. Check with the seed company for the optimum temperature for seed storage and seed germination. Maintain proper moisture content and minimize temperature fluctuations during germinations. 

Seeds in Humid Environment

The goal when germinating seed is to keep continuous moisture near the seed. This can be tricky, because too much water can cause the seed to rot as well as encourage algae growth and attract shore flies.

Reduce Moisture during Germination

Once the seed germinates and sends the radicle down into the growing medium, it is important to start reducing the amount of moisture maintained in the growing medium by decreasing mist frequency or frequency of boom or hand watering. Remember the wettest portion of a germination medium is at the bottom of the cell.  If the growing medium is continuously saturated / overwatered and the cells are deep, it is possible that few roots will grow to the bottom of the cell due to lack of oxygen.

Keep substrate Dry Between Watering

Once the roots reach the sides and bottom of the cell, the surface of the growing medium needs to dry between watering and misting should be discontinued. If the germination medium is predominately peat moss, then the surface of the growing medium should lighten to light brown when it is time to water. Humidity should also be reduced, and more air flow needs to be introduced to help produce harder, more compact growth.

Fertilize Seedlings Timeously

Most germination media come with a starter fertilizer charge, so fertilizer does not need to be applied until the first set of true leaves emerges. At this point, nutrients may have been used up or leached from the growing medium, so fertilizer should be applied as a continuous feed, starting at 25-50 ppm nitrogen, then increasing to 75-100 ppm nitrogen prior to transplant.

Suitable Fertilizer

The type of fertilizer used should be matched with the alkalinity of the water and the nutrients provided or not provided by the water. The Electrical Conductivity should be less than 0.75 mmhos/cm during the first few weeks and eventually end up at 0.75-1.25 mmhos/cm prior to transplant. The pH of the seedling medium should be 5.5-6.2.

Young Plugs

Using a value-added growing medium with Bacillus makes it possible to produce stronger and more resistant plants. The Bacillus bacteria help to suppress plant pathogens that can cause damping-off during seed germination and plant establishment. This active ingredient helps to produce quality plants and to reduce seedling loss.

There are, of course, other variables to consider when germinating and producing seedlings, but these  key elements have the advantage of applying to all plants started from seed. By putting these basic tips into practice, it can help reduce errors and improve crop quality. JS